GM Training DVD

Yleistä jutustelua. Rajoitetusti myös Cadillaceihin liittymättömiä juttuja.

Moderator: JiipeeH

Post Reply
sepe J
Coupe Seville
Posts: 124
Joined: Sun Sep 21, 2008 8:57 pm
Location: Lahti

GM Training DVD

Post by sepe J » Tue Dec 30, 2014 6:25 pm

Minkäslaisen ohjelman toi GM DVD vaatii et alkaa pelittää windows 8.1sessä??
Tommosen ohjeen löysin mut ei nyt oikein...

GM STC Computer-Based Training Component Instructions
These instructions provide a step-by-step guide for running GM STC Computer Based Training (CBT) component courseware.
To Run the Courseware:
1. Be sure you have installed the GM STC courseware viewer and uploader. If the item GM STC does not appear under Programs on your start menu, refer to the GM STC CBT Installation compact disc (CD) and instructions.
2. Insert the CD labeled with the component name and number. (This CD will NOT autostart)
3. Write your name with the component name and number on the label of a blank floppy diskette and insert it into the diskette drive. (You may use another form of removable media, such as an Iomega Zip ® disk, if your computer supports its use.)
4. Select the following options from the Windows Start menu:
Start > Programs > GM STC > GM STC Courseware
5. Follow the component instructions.
To Leave in the Middle of a Course Component:
1. Select the Exit button.
This will insert a 'Bookmark' at your location within the lesson. The bookmark is stored on the floppy diskette. By taking the floppy diskette and the CD to another computer, on which the GM STC courseware viewer is installed, you can continue training from the point at which you left off.
2. Remove and store the floppy diskette and course component CD.
To Re-enter a Course Component:
1. Insert both the CD and the floppy diskette you used to begin the course component into the computer.
2. Select the following options from the Windows Start menu:
Start > Programs > GM STC > GM STC Courseware
3. A student confirmation message will appear. Click Yes if it is the correct student floppy diskette.
4. Select Click here to start.
5. When prompted, select Return to Bookmark to go back to the point where you left off.
6. Follow the instructions.
To Upload Test Scores:
To receive credit after completing all parts of the training component, you must upload your test results and course evaluation. The computer from which you upload the test scores must have an operating Internet connection and the GM STC courseware uploader must be installed. In addition, you must have a valid student ID and password for the TMS. Check with your manager if you do not know, need to be added, or have forgotten your password.
1. Ensure that the floppy diskette containing your test results is inserted in the floppy diskette drive and is not write protected.
2. Start up your Internet connection if needed.
3. Select the GM STC Final Test Upload menu option from the Start menu.
Start > Programs > GM STC > GM STC Final Test Upload
NOTE: If you have not inserted a floppy diskette, you will receive the following message: "Removable Media is NOT ready, please confirm drive as Target and verify that media is present Drive A:
Select Abort to Exit
Select Retry and insert floppy diskette to try process again
Select Ignore to identify information is in a different directory.
NOTE: Once Ignore is selected, the GM STC Uploader window will appear with no courses listed. Click on the Select Directory button. In the Select Directory Dialog window, select the appropriate directory and file path. Next click on the appropriate file and click OK.
4. The CBT Final Test Upload v2.0 window will open and list completed courses(s). Using your mouse, click once on the file to be uploaded and click on the button labeled Submit to TMS.
5. A pop-up message will ask you to confirm the course to be uploaded. Select the Yes button to proceed.
6. A TMS login screen will then appear. Enter your TMS Student ID (SSN) and password as required and hit the OK button.
7. A message will appear indicating that the upload is complete. Select the OK button.
NOTE: You can only upload one course at a time. To see what course(s) have been successfully uploaded, note the # symbol in the Sent Column.
8. When done, click the Exit Upload button to close the uploader.

Note: Do not use this GM STC training product on GM Online computers.
For technical help, check "Frequently Asked Questions" (FAQs) on the Web at www.gmstc.com. If your question is not listed, submit it to us using the "Contact Us" tab.

JOKER13
Sedan Deville
Posts: 17
Joined: Sat Aug 24, 2013 7:33 am

Re: GM Training DVD

Post by JOKER13 » Wed Dec 31, 2014 4:13 pm

Vaikuttaa tosta nopeesti luettuna että on sen verran vanha ohjelma että ei ihan uppoo Winukkaan, ku tallenus tapahtuu perus disketin kautta :D Sit näkyis viel tarviivan jonkun opiskelija tunnuksen ja TMS salasanan(?). Käskevät kysyä esimieheltä jos tunnuksia ei ole....

sepe J
Coupe Seville
Posts: 124
Joined: Sun Sep 21, 2008 8:57 pm
Location: Lahti

Re: GM Training DVD

Post by sepe J » Wed Dec 31, 2014 5:56 pm

Ton leviyn kun laittaa tonne DVD asemaan niin alkaa tulla kauheesti kuvia :shock:
Image
Image
Olishan noi mukava saada pelittämään.

JOKER13
Sedan Deville
Posts: 17
Joined: Sat Aug 24, 2013 7:33 am

Re: GM Training DVD

Post by JOKER13 » Sat Jan 03, 2015 10:39 am

Kuvia? hmmmmm.... Siis toi näyttäis olevan GM:n valtuutetun myyjän/huollon mekaanikoille (opiskeleville) tarkoitettu softa eli siis jonkilainen verkko oppimis ympäristö. Voihan se olla että sen saa avattua ainaki alkuvaiheeseen mutta jos sitä haluaa tosissaan alkaa käyttää niin tarvitsee ne tunnukset... Onhan toi toki aika vanha toi softa (copyright 2000 ja 2001) joten voi olla et googlailulla voi löytää jotkut "crackit" tohon :wink: Voin yrittää katella tossa kun tulee aikaa paremmin :)

sepe J
Coupe Seville
Posts: 124
Joined: Sun Sep 21, 2008 8:57 pm
Location: Lahti

Re: GM Training DVD

Post by sepe J » Thu Jan 22, 2015 7:33 pm

Yks kaverin kaveri ajo noi cd levyt ihan tähän 8.1 windowssiin.
Image
Image

Post Reply